حديثاً, حدث ارتفاع في درجة حرارة الطقس بشكل متكرر, وتجاوزت درجة الحرارة في العديد من الأماكن 40 درجة مئوية. سيكون لدى العديد من المستخدمين سوء فهم: هناك الكثير من أشعة الشمس في الصيف, so is the power generation of photovoltaic power plants higher?

تدابير العاكس للتعامل مع ارتفاع درجة حرارة الطقس
في الحقيقة, it is not the case. The power generation of photovoltaic power plants is determined by many factors, among which the key factors are irradiance and ambient temperature. Hot summer is often accompanied by high temperature, not high irradiance. The temperature characteristics of solar modules are negative temperature coefficients, and the power generation performance of modules will decrease as the temperature increases. لذلك, the peak power generation of photovoltaic power plants often occurs in late spring and early summer or late summer and early autumn. في هذا الوقت, the ambient temperature is suitable and the irradiance is high, which achieves the best conditions for photovoltaic power generation.

فضلاً عن ذلك, the inverter is usually installed outdoors, even in direct sunlight, and the internal temperature of the inverter will increase accordingly in the high temperature environment in summer. The high temperature environment may also cause the inverter to over-temperature and load-drop protection, affecting the power station. power generation. لذلك, the heat dissipation performance of the inverter is one of the important factors affecting the power generation efficiency and service life. التالي, I will introduce how the inverter can better cope with high temperature weather.

1. Ensure air circulation

Ensure smooth air circulation around the inverter. Do not install the inverter in a small and closed environment. If multiple inverters are installed on the same plane, it is necessary to ensure that there is enough distance between each inverter. This not only It can ensure the ventilation and heat dissipation of the inverter, and there is enough operating space for later maintenance.

2. Avoid the wind and the sun

Secondly, although the protection level of the inverter is IP66 or IP65, it can reduce the chance of the inverter being exposed to wind, sun and rain, which can prolong the service life of the inverter. When installing the inverter, you can choose to install it at the bottom of the module or under the eaves. If the inverter is installed on the roof of the color steel tile, it is recommended to install the awning at the same time, which can not only shelter from the wind and rain, but also reduce the direct sunlight, reduce the temperature of the inverter, and avoid the load reduction caused by the over-temperature of the inverter. power generation efficiency.

3. Pay attention to post-maintenance

After the inverter is installed, it is necessary to pay attention to the later maintenance, and regularly clean the fan, fan cover or heat sink to ensure the heat dissipation and cooling of the inverter. Usually, the inverter will use intelligent air cooling technology to dissipate heat, and the fan will intelligently adjust the speed according to the internal temperature of the inverter. When the inverter works in a high temperature environment, the intelligent air cooling technology can effectively reduce the probability of load reduction. The inverter can run stably while extending the service life of the fan.

فضلاً عن ذلك, the inverter has a fan fault alarm function. The operation and maintenance personnel can receive the alarm information in the monitoring background, and quickly and accurately locate the fault, which is convenient for the operation and maintenance personnel to eliminate the fan fault in time, reduce the power generation loss, and ensure the power generation income.